Send Inquiry

Request To Call Back

Digital AC-DC Clamp Meter DT-8250

Name: Digital AC-DC Clamp Meter DT-8250
Brand: CALTECH ENGINEERING SERVICES
Price: 50 INR
Availability: InStock

Price 50 INR/ Piece

Get a Price/Quote

MOQ : 50 Pieces

Digital AC-DC Clamp Meter DT-8250 Specification

Measurement Range
AC/DC Voltage: 0~600V; AC/DC Current: 0~600A

Diameter
Max jaw opening 30mm

Capacity
600A/600V

Frequency
50/60Hz

Connectivity Type
None (standalone, not networked)

Equipment Type
Clamp Meter

Temperature Range
0C to 40C

Application Media
Electrical measurements

Sensor Type
Hall effect

Current Range
AC: 0~600A, DC: 0~600A

Humidity %
<85% RH (non-condensing)

Protection
Overload protection on all ranges

Resolution
1A/0.1V

Material
ABS plastic housing

Power Supply
2 x 1.5V AAA batteries

Power Consumption
Approx. 5mA

Accuracy
1.0% (on basic range)

Display Type
3 digit LCD display

Range
AC 0~600A, DC 0~600A

Backlight Display
Yes

Weight
Approx. 250g (including battery)

Operating Altitude
Up to 2000 meters

Low Battery Indication
Yes

Diode Test
Yes

Continuity Buzzer
Yes

Data Hold Function
Yes

Sampling Rate
2 times/sec

Dimensions
220mm x 70mm x 40mm

Safety Standard
IEC61010-1, CAT II 600V

Digital AC-DC Clamp Meter DT-8250 Trade Information

Minimum Order Quantity
50 Pieces

Supply Ability
500 Pieces Per Day

Delivery Time
1 Week

About Digital AC-DC Clamp Meter DT-8250

Technical Specification

Function	Range	Resolution	Frequency	Accuracy	Overload
AC Current	400A 2000A	0.1A 1A	50-60Hz 50-60Hz	(2%rdg+5dgts) (2.5%rdg+5dgts)	2200A (1 Min)
DC Current	400A 2000A	0.1A 1A		(2%rdg+5dgts) (2.5%rdg+5dgts)	2200A (1 Min)
AC Voltage	4V 40V 400V 750V	0.001V 0.01V 0.1V 1V	50-60Hz	(1.5%rdg+5dgts)	800VAC
Input Impedance 10M	400V	0.1V	40-400Hz	(2.5%rdg+5dgts)
DC Voltage Input Impedance 10M	4V 40V 400V 1000V	0.001V 0.01V 0.1V 1V		(1%rdg+3dgts)	1200VDC
Resistance	400.0 40.00 400.00 4.000M 40.00M	0.1 0.01K 0.1K 1K 10K		(1%rdg+3dgts) (1%rdg+3dgts) (1%rdg+3dgts) (1.2%rdg+3dgts) (1.5%rdg+3dgts)	500VAC
Frequency	99.99Hz 999.9Hz 9.999KHz 99.99KHz 999.9KHz 999.9KHz	0.01Hz 0.1Hz 0.001KHz 0.01KHz 0.1KHz		(1%rdg+3dgts) Sensitivity: 5V rms Max: <10Vrm<s (10Hz=1MHz) <300Vrms(50Hz-60Hz)	500VAC
Diode	Test current: 0.6mA(appr.) Open vltage: 1.5V (typ) Resolution: 0.001V	500VAC
Continuity		<30	500VAC

Reliable AC-DC Measurement and Safety

The DT-8250 Clamp Meter offers precise AC/DC voltage and current readings with an accuracy of 1.0% on basic ranges. Its robust overload protection and compliance with IEC61010-1, CAT II 600V safety standards ensure secure operations in both industrial and household settings, making it a dependable tool for electricians, dealers, and service providers.

User-Friendly Features for Enhanced Usability

Equipped with a backlight display, data hold function, and low battery indication, the DT-8250 is built for convenience and uninterrupted work. Its continuity buzzer, diode testing, and quick sampling rate (2 times/sec) enable efficient troubleshooting and routine inspections, even in low-light or challenging conditions.

FAQs of Digital AC-DC Clamp Meter DT-8250:

Q: How do I use the Digital AC-DC Clamp Meter DT-8250 for current measurements?

A: To measure current, open the clamp jaws and position them around a single conductor. Ensure the meter is set to the appropriate AC or DC current setting. The device will detect and display the current flow up to 600A, with a maximum jaw opening of 30mm.

Q: What safety standards does the DT-8250 clamp meter comply with?

A: The DT-8250 meets the IEC61010-1 and CAT II 600V standards, providing overload protection across all ranges to enhance user safety during electrical inspections and measurements.

Q: When should I replace the batteries in the DT-8250?

A: The clamp meter is powered by two 1.5V AAA batteries and features a low battery indication on the display. Replace the batteries when the indicator appears to ensure accurate and consistent operation.

Q: Where can the DT-8250 be operated effectively?

A: This clamp meter is suitable for use at altitudes up to 2000 meters and in environments with temperatures between 0C and 40C and humidity below 85% RH (non-condensing).

Q: What processes benefit from the data hold and backlight display features?

A: The data hold function allows you to freeze the displayed reading for recording or analysis, while the backlight display ensures visibility in dimly lit spaces, streamlining the process of fault finding and documentation.

Q: Is the DT-8250 clamp meter suitable for diode and continuity testing?

A: Yes, the meter includes dedicated settings for diode testing and features a continuity buzzer, enabling quick checks for electrical continuity and semiconductor integrity.

Tell us about your requirement

Price:

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number